Initial Publication Date: March 13, 2010

Week 5: Monitoring Invasive Species

Using ArcGIS to Analyze and Predict Invasions

Tamarix forest in riparian zone. Image courtesy of Steve Dewey, Utah State University, United States.
top of page

Key Investigation Questions:

  • How has the Tamarix plant's invasion proceeded over time?
  • What are the factors limiting Tamarix's spread through the entire United States?
  • How are scientists using Satellite imagery to aid in predicting Tamarix's next move?






Introduction

Tamarix, or saltcedar, grows as a woody shrub or small tree. It was introduced to the United States in the 1850's as an ornamental plant capable of erosion control. It successfully adapted and quickly spread into wetlands displacing native trees such as cottonwood, willow and mesquite. Now, Tamarix has invaded nearly all the watercourses and wetlands in the Southwest US. As one of the most successful and common invasive species in the United States, it has overtaken nearly one million acres of habitat. Since it can transpire as much as 300 gallons of water per day, it is capable of causing a wetland to completely dry up. Additionally, Tamarix has a tendency to increase the salinity of the soils in which it grows and it is of little or no value to wildlife. Although Tamarix is difficult to eradicate, in locations where it has been eliminated native vegetation and wildlife have returned and flourished.

top of page

Launch ArcGIS and Orient the Map for the Investigation

Shortcut1

  • Launch ArcGIS by double-clicking its icon on your desktop or by clicking its icon on the Launch Bar (Win).
  • Choose File > Open, navigate to (path) and select the file C:/EYESINTHESKY2/WEEK5/Invasive_SpeciesAM. Then click open.
  • Once the map opens, turn on the US Rivers and Tamarix layers. Use the Zoom In Zoom In tool to click and drag a box, around the contiguous United States.
  1. Turn on the US Rivers and Tamarix layers by clicking in the checkbox next to their names.
    1 US  Rivers Tamarisk Layers
  2. Use the Zoom in tool to click and drag a box, around the contiguous United States. 2 Contiguous States

4 US States Layer  
top of page

Investigate the Tamarix Invasion in the United States

Where is the present Tamarix invasion and how far has it spread across the United States?

  1. On the map, click and drag to draw a rectangle around a group of Southwestern states.
  2. When the tool is released, the selected Tamarix points are highlighted in blue. These points are selected because you chose the Tamarix layer as being the only selectable layer.

top of page

Where is the Tamarix invasion the most severe?

Tamarix can be found throughout the Southwest United States. Some states have more of a Tamarix problem than others, but because Tamarix spreads easily and is very difficult to eradicate, plant biologists are keeping a close eye on the situation.

Zoom and Pan around the map to get a better idea of the extent of the invasion and to answer the following questions.

  1. In which states has Tamarix been sighted?
  2. What relationship do you see between rivers and Tamarix?

top of page

Create a Spatial Query to Investigate the Extent of the Invasion

Query Southwest states to investigate the extent of the invasion.

  1. Right click on the US States layer, click on Selection, and then click on Make This The Only Selectable Layer
    9 US State Selectable Layer
  2. Click on the Select Feature Select Feature Tool tool.
  3. Click inside the state boundary of Arizona.
  4. After clicking inside the Arizona state boundary, Arizona (AZ) should now be highlighted (outlined in blue).
    1. Right click on the US States layer, click on Selection, and then click on Make This The Only Selectable Layer.
    2. Click on the Select Feature Select Feature Tool tool.
    3. Click inside the state boundary of Arizona.
    4. After clicking inside the Arizona state boundary, Arizona (AZ) should now be highlighted (outlined in blue).
  5. Click on the Selection menu option at the top of the map view. A pulldown context menu will open.
    11 Selection by Location
  6. Click on Select by Location.
  7. In the Select By Location dialog box, set the "I want to:" pulldown arrow to "select features from."
  8. In "the following layer(s):" Place a checkmark in the box in front of Tamarix.
  9. Set the "that:" pull down arrow to "are within."
  10. Set "the features in this layer:" to US States.
  11. Click OK. The buffer dialog window will be displayed on the map.
    1. Click on the Selection menu option at the top of the map view. A pulldown context menu will open. 
      11 Selection by Location
    2. Click on Select by Location.
    3. Set the "I want to:" pulldown arrow to "select features from."
    4. In "the following layer(s):" Place a checkmark in the box in front of Tamarix.
    5. Set the "that:" pull down arrow to "are within."
    6. Set "the features in this layer:" to US States.
    7. Click OK. The Select By Location dialog window results will be displayed on the map.
  12. Return to the map and right click the Tamarix layer.
  13. Open the Attribute Table of Tamarix.
  14. How many results have been selected?
  1. Right click on the AZ River layer with the Identify tool Identify .
  2. In the Identify results box, scroll down to find the field "Name".
  3. List several rivers that have been invaded by Tamarix.
  4. Other Tamarix invasions do not appear to be in streams. Since Tamarix needs wet conditions to survive its first year, what types of areas might also be suitable habitat for Tamarix?

top of page

Add Satellite Data to Connect Tamarix Spread with Vegetation Index

By using the satellite data of vegetation health the scientists at NASA and USGS are able to use habitat preferences, such as moist soils and low elevations, to begin to predict where Tamarix plants were most likely to appear in the future.

Adjust the layers on the map for the investigation.

Plants are sensitive to their environment and so they serve as a good indicator whenever there is change. Scientists routinely produce global NDVI maps to help them monitor and investigate shifts in plant growth patterns that occur in response to climate changes, environmental changes, and changes caused by humans. Farmers and resource managers also use NDVI maps to help them monitor the health of our forests and croplands. So these maps are useful both for scientific research as well as societal benefit.

Notice that the in Arizona the Tamarix invasion prefers the lower elevations where there is more desert. It is found in the river corridors and other low lying wet areas.

top of page

Add Elevation to the Map to Solve the Puzzle

So far we have observed that Tamarix invasion patterns follow the river corridors and also other areas that appear to have healthy green vegetation in the satellite NDVI image. So, why doesn't Tamarix invade everywhere? What is the missing element in the puzzle?

top of page

Resources

top of page


« Previous Page      Next Page »